Our Universal Sump Plugs are perfect for sealing a sump with a stripped thread. Easy and quick to fit, the Universal Sump Plug will allow you time to sort out the sump at your leisure and get your customer back on the road in the short term.

And you can use this plug again and again, so it's a really useful tool.

Universal Sump Plug with Sealing Washer

Simple to Fit

For sumps with an M14 or larger sump plug: Just push it through the old sump plug hole and hand tighten.
For sumps with a sump plug smaller than M14: Unscrew the nut, push the shaft through the sump plug hole and refit the nut. Note: This means removing the sump. Alternatively, if you have got to replace the sump anyway: Bore out the sump to 15mm, then you can fit the universal sump plug without removing the sump. Note: If you have bored the sump out , don't forget to flush out the sump to avoid any metal filings being left in the sump.

Try one and see what you think!

Off Road Vehicle Repairs 

Another great use for the sump plug is for Off Road vehicle sump repairs:
Imagine you've been out on an Off Road jaunt and have caught your sump on a rock, which has pierced the sump. How are you going to get home without wrecking the engine?
Check where the hole is and whether it is big enough to fit the universal sump plug. If it is, just fit the universal sump plug and get home without damaging your engine any further. Then once you are home you can order & fit a new sump at your leisure.